Close Cart Box

Your shopping cart is empty!

Retrosound Amplified AM/FM Discreet Internal Hideaway Aerial HPA1

The RetroSound HPA1 amplified AM/FM hide-away antenna is a great solution for anyone who doesn't want to install a standard wing or body mount antenna. The HPA1 installs in seconds using a standard antenna plug and your radio's power antenna wire. This antenna uses magnetic field circuitry for enhanced radio reception. It can be installed almost anywhere thanks to the supplied 105-inch antenna lead and power wire.

The HPA1 antenna is designed to mount inside your vehicle when you are not able to use a traditional wing or body mount antenna

Instructions for use:

  • Place the main body of the HPA1 as high in the dash as possible.  Avoid placing it near any high-current wiring.
  • Ground the main body of the HPA1 to a clean metal point close to the HPA1 body via the small braided cable with eyelet.
  • Route the antenna cable with the thin black power wire to your radio location.
  • Connect the thin black wire to a 12 volt ignition source or the blue power antenna output wire of your RetroSound radio
  • Connect the male antenna plug into the female antenna receptacle of your radio.

Please note: This aerial ideally needs to be installed above the dash and not under any metal surface, we would always suggest using a body mount aerial for absolute best results.

Retrosound Amplified AM/FM Discreet Internal Hideaway Aerial HPA1

  • £34.99


PLEASE NOTE: ONLY SUITABLE FOR NEGATIVE EARTH VEHICLES

Tags: retrosound, amplified, am/fm, discreet, internal, hideaway, aerial, hpa1, aerials