This harness extends your power related wires (12V constant, ignition, ground, remote amp and power antenna turn-on leads), as well as your 4 channels of speaker leads and 2 channels of dedicated subwoofer output (RCAs), to a location up to 9' away from the face and control shafts of your RetroSound® radio.
This is very useful in custom installations, or in situations in where there is not enough room behind the dash for the radio body. For example, after-market air conditioning often adds ducting behind the dash that would interfere with the radio body. With this extension cable you can mount your RetroSound® radio body almost anywhere, up to 9' away from the dash location.
Additionally, this main wire harness extension can be used with your RetroSound® Quadraphonic amplifier, if the amp cannot be mounted in close proximity to your RetroSound® radio. The harness of the Quadraphonic amp will plug directly in to this harness extension, which plugs directly in to your RetroSound® radio, eliminating the need to cut and connect wiring in situations where the amp needs to be mounted further from the dash location of the radio.