Supplied with a Bezel, Bracket and Knob set to suit the 1963-67 Chevrolet Corvette, this San Diego is a DAB radio for your vintage, it also features built-in Bluetooth connectivity for hands- free phone calls and wireless audio streaming. San Deigo features a 32,000 colour display to customize your radio to your vehicle's interior. Two USB ports for a USB Memory Stick or Thumb Drive plus two standard auxiliary inputs are included. San Diego has a built-in 25 watts x 4 channel power RMS MOSFET amplifier as well as front, rear and sub RCA pre-outs, to add external amplifiers. It mounts seamlessly into your dash thanks to RetroSound's patented InfiniMount adjustable bracket system.

Built in DAB+

This radio has a built-in DAB+ tuner that is compatible with both DAB and DAB+ digital radio broadcasts. The digital broadcast signal resists multipath interference offering CD-quality audio with more fidelity and reduced noise compared to analog radio. A DAB antenna is required to listen to DAB and DAB+.

We offer an optional antenna adapter that allows you to convert a standard AM/FM antenna to receive DAB/DAB+ signals (see DAB1) or a windscreen mounted Digital Antenna (see DAB2).

32,000 Colour Options

This radio display has some preset colour options in the menu, however should you want to match the colour of your vehicle interior illumination, it has the option to set Red Green Blue (RGB) options to match the colour perfectly. All easily adjustable through the right hand knob menu.

Features

Built-in DAB/DAB+ Tuner
Built-in Bluetooth for hands-free calling and audio streaming
Wireless Audio Skip Back & Forward from your iPhone or Android device
Plays MP3, FLAC and WMA files via USB input
Selectable 32,000 colour LCD illumination with user presets
AM/FM tuner with 30 presets and RDS
Selectable international tuner frequencies
Built-in amplifier (25 watts RMS/45 watts peak x 4 channels)
3 EQ presets plus user-controlled bass, mid-range, treble, fader, and balance adjustment
InfiniMount shaft/bracket system for maximum installation flexibility
Available with period-correct knobs and bezel
Inputs: 2 rear-mounted standard USB ports and 2 rear auxiliary inputs
Outputs: 6-channel pre-amp outputs (front, rear & sub)
Separate power antenna and amplifier turn-on lead(s)
1 year warranty

Included in the box:

Main Wiring Harness

ISO to Retrosound Radio

Power & Speaker Harness

Bare wires to ISO

Motor 6 San Diego Body

Main Unit

Bluetooth Microphone

Remote Mountable Mic

Radio Nose (Face)

in selected finish

Radio Control Shafts

Pair

Shaft & Face Hardware

with washers

Hardware

Mounting Backstrap

4 Plastic Washers

Infinimount Brackets

Selected Fascia Kit & Knobs

Retro Radio
DAB Radio	DAB+
Made for iPod / iPhone Compatibility	No (Bluetooth Audio or AUX Only)
Built-In Bluetooth	Yes
USB Port for WMA/MP3 Music Files	1
Auxiliary Inputs for Portable Devices	2
Display	32,000 Colors
AM/FM RDS Tuner with 30 Pre-sets	with RDS
Selectable Tuner with USA/EU/Japan Frequencies	Yes
Power Output	25W x 4Ch
Front and Rear RCA Low Level Pre-amp Outputs	Yes
Subwoofer Output with Variable Crossover	Yes
Selectable 12/24 Hour Clock	Yes
General
Dimensions (radio face & push-buttons only)	3.5”W x 1.5” H x 1.05” D
Dimensions (radio body)	3.96”W x 1.98”H x 4.30”D
Power Requirements	11.5-14.4 volts
Current Consumption (during operation)	Max. 15A
Current Consumption (car off)	<3.5 mA
Output Power (@ 14.4 volts @ 4 ohm @ 1% THD)	25x4 watts RMS 45x4 Max Power
Output Impedance	4-8ohm
AUX Input (AUX cable length, 8”)	>300 mV / 6 kΩ

Chevrolet Corvette 63-67 Santa Barbara DAB Radio Bluetooth USB Aux

Brand: Retro Manufacturing
Product Code: M6-C-110-112-54-71
Availability: Available

£339.99

Available Options

Add Ons

Add DAB Splitter (+£15.99)

Qty

Your shopping cart is empty!